Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ognen

Pages: 1 ... 3 4 [5] 6
61
Questions & Problems / No problem to open with Photoshop CS.
« on: July 09, 2004, 03:31:47 PM »
All templates (.psd files) can be opened by Photoshop CS. I check the templates and there is no problem to open them with PS CS.
The only message that appearing is:
"Some text layer might need to be updated before they can be used for vector based output"
"...,some text layers contain fonts that are missing. These layers will need to have the missing fonts replaced before they
can be used for vector based output"

Click "No" if your final output is not a vector based and "Update" if the final output is vector based (example Flash(SWF)).
Install the missing fonts.



Ognen

62
Questions & Problems / Basic knowledge of HTML is require.
« on: July 06, 2004, 06:30:23 AM »
Actually to do this edit you must have some basic knowledge of HTML tags.
You can go here http://www.w3schools.com/html/tryit.asp?filename=tryhtml_iframe to see how the iframe looks. The left side of the example is Source Code and right side is Output.
So, open the HTML page (you generated by Photoshop - index.html) with any HTML editing program (such as Dreamweaver, Front Page ...or even Notepad) and insert the code I previously show you:
<iframe src="page.html" width="300" height="400"scrolling="auto"></iframe>
Then create a new html page named - page.html with all content you would like to display. This page will be displayed inside of the index.html. The result is a page in a page. Two pages in one.

If you find it too difficult to understand, we can do that for you for a small fee.

Ognen

63
Questions & Problems / You have to use <iframe> tag...
« on: July 03, 2004, 10:59:11 AM »
You have to use <iframe> tag to include external web page into main html file. Open the generated by Photoshop html file and insert the code below in the section where you would like do display the content.
Add the tag into the BODY of your HTML document:

<iframe src="page.html" width="300" height="400"scrolling="auto"></iframe>

-----------
page.html – this is the page with your content that will be displayed in the section.
width – width of the frame in pixels.
height – height of the frame in pixels.
scrolling – By default, browsers add vertical and/or horizontal scrollbars when the content loaded into an inline frame exceeds the visible content region of the element, so you can set the scrolling attribute to “auto”.   If you want scrollbars to be in the frame at all times, set the scrolling attribute to “yes”. If you want to prevent scrollbars from appearing in the frame, set the attribute to “no”.
You may also use the CSS overflow style attribute: style="overflow:auto"

Good luck!

Ognen

64
Photoshop provides tools for creating and manipulating static images for use on the Web. You can divide an image into slices, add links and HTML text optimize the slices, and save the image as a Web page. The template layout is already sliced, so you just need to save the image for use as a Web page. When you save the image for use as a Web page, you must choose to generate an HTML file (select File >Save for Web... Select HTML and Images (from "save as type" menu) to generate all files required to use the artwork as a Web page). Photoshop generate an HTML file and separate image files for the slices in the artwork. This file contains information that tells a Web browser what to display when it loads the page.
Upload all the generated files (HTML and all slices) to your hosting space.

Good luck!


Ognen

65
You have to use Adobe Photoshop and Adobe Image Ready to edit the psd file!  Adobe Image Ready is a companion program to Photoshop which allows for optimizing images for delivery on the web.

- Open the .psd file in Adobe Photoshop (v.5.5 and above).
- Do all the changes you need!
- Save your image, then in Photoshop's File menu select Jump To Image Ready (Shift+Ctrl+M). Your image will now open in the Image Ready window, which is quite similar to Photoshop's interface.
- Then select Save Optimized As... Select HTML and Images (from "save as type" menu) to generate all files required to use the artwork as a Web page. This includes an HTML file and separate image files for the slices in the artwork (to view the slices in Photoshop: View > Show > Slices). The HTML file includes code for any links, image maps, and other effects in the document.  When you save the image as a Web page, Image Ready adds JavaScript code to the resulting HTML file to specify rollover states.

Good luck!


Ognen

66
Questions & Problems / Open the template in Microsoft Frontapge
« on: June 03, 2004, 02:23:18 AM »
To open the template in Microsoft Frontapge please follow the instructions below:
On the File menu, click Open Web, and then in the Open Web dialog box, use the Look In box to find the local folder where you extract the archive (zip) containing the template (index.html) page. Once you open the template as a web site in Front Page, you can modify all the contain and to add new pages.

Good luck!

ognen

67
Questions & Problems / Thank you for using our template!
« on: May 28, 2004, 03:06:09 PM »
Thank you for using our template!  :)

Sure, for non commercial project, (as is in your case) you can put back link anywhere in your website.

--------
About the note. For representing of our free templates, we require clear contact with any of our partners and to know how and where the templates are presented. We don't allow our templates to be offer on websites dealing with any illegal contents.

ognen

68
Template Customization / 3dsphere temp
« on: February 25, 2004, 06:31:33 AM »
Hi harpua,

Welcome to the forum. :)

To change the nav buttons you must edit the .PSD file in Photoshop. After you change button's names (or whatever it is) you have to use Image Ready (the program is a part of Adobe Photoshop 5.0 and above) and to export .html and images. Image Ready will generate the table structure and will include the Java Script (for roll-over effect) into the .html page. Be careful and don’t change the map over the nav buttons.

However, if you find too difficult to do that, just tell us what you would like to change in the template and we can do that for you.


Ognen

69
Announcements & News / The newest template
« on: November 19, 2003, 06:52:19 AM »
The newest fantastic themed template provided by our 3D artist Oli is ready for download. The template is perfect for your private home page or thematic web site.
Liquid site layout covered any screens sizes, original navigation panel with 3D buttons with roll-over effect on it.

70
Template Customization / Thanks
« on: October 13, 2003, 08:57:17 AM »
You're welcome!
Thank you for using our temlates and all the luck with your new site layout!

Ognen.

71
Questions & Problems / Without login script
« on: August 23, 2003, 02:18:20 AM »
No, the templates comes without login script. This is just a text field and user can implement any script to it.
 However we also can do that (in Java Script or PHP) if somebody find difficult to do that alone.

Ognen

72
Template Customization / different screen resolution
« on: August 19, 2003, 05:49:11 AM »
Hi,
From your explanation I see that you trying to make redesign not just customization. The template ognen06 (and most other templates) is highly structured site designed primarily for 800 x 600 screen resolution. (Current stat shows 24.4% of surfers are browsing using a screen resolution of 800x600 or bigger.
1024 x 768 - 44.97%
800 x 600 - 24.4%
1280 x 1024 - 13.63%
1152 x 864 - 6.45%)

You have several solutions to solve that problem with different screen resolutions:
1. Make fluid design by setting the table width to 100%. I  wouldn't use this method for the current template (ognen06), because the slices and the design of the template are not suitable for liquid pages. You should make new slices from the original .psd file (that one we supply you) and put specific images as a background to fill extra space on the table.
 2. Use a java script file to redirect to 3 different frames sets, 800x600, 1024x768, 1152x864.  Example:
<SCRIPT LANGUAGE="JavaScript">
function redirectPage() {
var url800x600 = "http://yoursite.com/800/index.html";
var url1024x768 = "http://yoursite.com/1024/index.html";
var url1152x864 = "http://yoursite.com/1152/index.html";
 if ((screen.width == 800) && (screen.height == 600))
window.location.href= url800x600;
else if ((screen.width == 1024) && (screen.height == 768))
window.location.href= url1024x768;
else if ((screen.width == 1152) && (screen.height == 864))
window.location.href=url1152x864;
else window.location.href= url800x600;
}
window.onload = redirectPage;
</script>
3.Also have similar method to redirect to different Style Sheets (CSS).
<SCRIPT LANGUAGE="JavaScript">
if (screen.width == 800) {
document.write('<link rel="stylesheet" type="text/css" href="800x600.css">');
}
if (screen.width == 1024) {
document.write('<link rel="stylesheet" type="text/css" href="1024x768.css">');
}
if (screen.width == 1152) {
document.write('<link rel="stylesheet" type="text/css" href="1152x864.css">');
}
</script>
You should use the .psd file to export 3 different size of the template in above methods.

Good luck!

Ognen

73
Template Download / Translate
« on: August 12, 2003, 03:18:49 PM »
If you want to translate to other language (ex. english to italian) you can use this site: http://babelfish.altavista.com/babelfish

74
Template Customization / Does Anyone KNOW???
« on: August 12, 2003, 06:58:24 AM »
Hello and welcome to our forum! :)

My suggestion is to open history folder on your browser and find these sites where you have been. The history folder contains links to pages you've visited.

Ognen

75
Suggestions / Suggestion for the Site
« on: July 15, 2003, 04:12:46 AM »
Thanks for the suggestion.
We plan to make a new (PHP&MySQL based) system for our templates with easy upload, automatic thumbnails and search capabilities. This gives us more flexibility to upload, update and categorize the templates. And easier search and preview of the templates for users.

ognen

Pages: 1 ... 3 4 [5] 6